Search UandiStar

1

MICRO CONTROLLER BASED SOLAR TRACKING SYSTEM PROJECT

  • Anonymous
  • Share

  • MICRO CONTROLLER BASED SOLAR TRACKING SYSTEM PROJECT
    SYNOPSIS Objective:
    The objective of this project is to control the position of a solar panel in accordance with the motion of sun. Brief Methodology: This project is designed with solar panels, LDR, ADC, Microcontroller, Stepper Motor and its driving circuit. In this project two LDRs are fixed on the solar panel at two distinct points. LDR (Light Dependant Resistor) varies the resistance depending upon the light fall. The varied resistance is converted into an analog voltage signal. The analog voltage signal is then fed to an ADC. ADC is nothing but analog to digital Converter which receives the two LDR voltage signals and converts them to corresponding digital signal. Then the converted digital signal is given as the input of the microcontroller. Microcontroller receives the two digital signals from the ADC and compares them. The LDR signals are not equal except for normal incidence of sunlight. When there is a difference between LDR voltage levels the microcontroller program drives the stepper motor towards normal incidence of sunlight. 1) INTRODUCTION Renewable energy is rapidly gaining importance as an energy resource as fossil fuel prices fluctuate. At the educational level, it is therefore critical for engineering and technology students to have an understanding and appreciation of the technologies associated with renewable energy. 

    CLICK HERE TO DOWNLOAD MICRO CONTROLLER BASED SOLAR TRACKING SYSTEM PROJECT

    1 Responses to “MICRO CONTROLLER BASED SOLAR TRACKING SYSTEM PROJECT”

    sandy said...
    December 9, 2012 at 11:30 AM

    how we can rotate the solar panel in accordance with the direction of sun


    Post a Comment

    Add your valuable comment here, ask any questions about this post,
    Share your opinions here.
    Dont write any Phone numbers in comment...


    Subscribe